by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Remove glass from current picture frames and shadow box. Trace the removed glass to determine the shape you need to cut. Using the SM20 with the SM500 blade, cut wainscoating for the two side frames.
Using the SM20 still equipped with the SM500 wheel, cut plywood for your center, shadowbox.
Draw your center design onto the plywood. Using a Dremel 4300 with a 561 accessory, plunge cut your desired design. Tip: Place rope lighting inside the shadow box to illuminate your design! Use your 4300 tool to plunge cut a hole in the back of your shadow box to pass the lights through.
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.