by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
We created various sized-reindeer. The following dimensions are to help guide you through making a floor-sized reindeer but you can reference these & use similar proportions when making smaller versions. • Body: 3" diameter & 14" long • Head: 2" diameter and 8" long • Legs: 1" diameter and 20" long • Neck: 1.5" diameter and 6" long For cuts in our branches under 2" in diameter we used the Dremel Saw-Max tool equipped with the SM500 Wood & Plastic Wheel. Measure & mark you cuts. Secure your log in a vice & cut along your marked line. If your log is over 3/4" in diameter, you'll need to rotate the log as you cut it. To do this, release pressure slightly so it is still secure but can be rotated. With your free hand securely holding the end of the log, turn it towards you very slowly as you cut along the marked line.
Next you'll need to drill a series of holes in your logs in order to assemble your reindeer: • Body: 4 to secure all legs & 1 to secure the neck • Head: 1 to secure the neck and 2 to secure the antlers Drill holes about 1.5" deep using a spade or standard bit. Diameter will vary depending on the branch size however, we recommend drilling the hole one size smaller than the branch diameter that is securing into the hole.
Before securing the legs, neck and antlers into their respective drilled holes, we recommend tapering the end of the branches. Use your Dremel Multi-Max tool, equipped with the MM480 Wood Flush-Cutting Blade to complete this step.
Finally, assemble your deer either with a dry fit for easy break down and storage after the holidays or ad a dab of wood glue in each hole before securing the pieces for an extra-sturdy hold.
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.