by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Cut pipe to desired size. Here, we cut our markers to about 4 inches. Tip: Use a vice or hammer to flatten out the top of the copper pipe once you have cut it.
Draw on design.
Carve your design into the pipe - Don't cut all the way through the pipe. Working at a low speed, make light strokes across your design. Use rubbing alcohol to remove any remaining design markings. Tip: For added control, use the Detailer's Grip attachment.
Rotary Tool - DIYSharpening a Chainsaw
Rotary Tool - How-ToCarving Pumpkins with a Dremel Cordless Rotary Tool
Saw - How-ToHow To Flush Cut Baseboard
Saw - DIYReplacing Ceramic Floor Tile