SKILL LEVEL beginner
by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
First, tightly clamp the wine cork. Cut each cork into ¼" thick pieces using a Multi-Max. For each napkin ring, you will need 13 cork coins total.
Next, use the rotary tool and accessory to drill holes into the center of each coin.
Next, tie a knot at one end of the twine, making the knot thick enough so it will catch the coins and they cannot slide off. Then, thread the twine through the 13 coins and tie another thick knot to secure the coins on the twine. TIP: Depending on the type of twine, you may need to tie multiple knots on each end to secure the coins on the twine.
Finally, connect the ends together and create a ring by tying a third knot. Fold a napkin into the ring and you are ready to set the table!