by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Begin by selecting a template for your puzzle. You can create one of your own or download our design on the Getting Started tab. Once you have your template printed or drawn out, spray mount it to your MDF panel. Tip: Before mounting your template, cut your MDF board to size. You can accomplish this cut quickly and easily with a Dremel Saw-Max and fitted with a SM500 wheel.
Secure your Moto-Saw onto your worktable and lock your wood and plastic cutting blade into place. Set your MDF board under the foot, lower the foot of your tool and plug it in. Turn the Moto-Saw on and cut along the template lines, cutting through the paper and MDF.
Place your printed photo face-down and assemble the puzzle pieces you just cut onto the top of the back of the photo. Trace each piece of the puzzle along the back-side of your photo. Use a razor knife to cut along your outlines.
Remove the template paper from your MDF pieces. Brush each puzzle piece with Mod Podge®. Adhere the photo cut-out to each piece and brush the top of each photo with Mod Podge®. Let the pieces dry completely and enjoy!
Rotary Tool - How-ToCarving Pumpkins with a Dremel Cordless Rotary Tool
Saw - How-ToHow To Flush Cut Baseboard
Saw - DIYReplacing Ceramic Floor Tile
Saw - DIYHow to Replace Damaged Plywood Subfloor
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.