SKILL LEVEL beginner
by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Begin by tracing the pattern of your choice, or use a heart as we, did onto 1/4" plywood. Then, using the Dremel Moto-Saw, begin in the center of the pattern and follow the pencil line to cut the charm out.
Next, trace the same pattern used for the plywood onto a map of a location you have visited.
Simply cut out the pattern with scissors.
Now, using a paintbrush, cover one side of the cut-out plywood heart with the clear adhesive, (we used Mod Podge®), place the cutout heart directly on top of the decoupaged heart and cover again with the adhesive to give it the glossy finish.
Next, personalize the heart by engraving with the Dremel Micro.
Finally, flip the heart over to burn a memory into the wood with the Dremel VersaTip to add more decore to the charm.
Other Projects You Might Like
seasonalDIY Elf on the Shelf
home decorAddress Numbers
home decorFront Door Knocker
seasonalCustomize Your Own DIY Wine Gift Box this Christmas