SKILL LEVEL beginner
by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Using the Flex-Shaft Attachment, clear away rust and loose paint with a 500 aluminum oxide abrasive wheel and 428 carbon steel brush. Recommended speed: 15,000 rpm.
Fill the depression by smoothing on body putty in thin, even layers.
After drying, sand away excess putty with the 407 drum sander and 408 sanding band. Feather edges to existing paint by hand with fine sandpaper. Recommended speed: 20,000 rpm.
Apply primer, overlapping into existing surface. Let dry and lightly hand sand. Apply several coats of finish paint, lightly sanding in between.