by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Source your reclaimed wood, basketball hoop and plywood. Use a Dremel Ultra-Saw™ to cut the plywood proportionately. Then, use the Dremel Multi-Max to sand the edges of the cut wood. Hint: Cut out the plywood backing 3" smaller than the reclaimed surface area to give you a nicer edge.
Next, secure the plywood backing to reclaimed wood using the hammer and nails.
Screw the hoop to front of the reclaimed wood, and add the net to the hoop.
Then, screw the mounting hooks to the back of the hoop, which is now ready to be mounted to the wall.
Rotary Tool - How-ToCarving Pumpkins with a Dremel Cordless Rotary Tool
Saw - How-ToHow To Flush Cut Baseboard
Saw - DIYReplacing Ceramic Floor Tile
Saw - DIYHow to Replace Damaged Plywood Subfloor
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.